¶ Universal Input Module Datasheet NG-UI4
Universal Input Module provides easy way to add inputs to your modular NG Cubes system.
It provides all possible input variations to accommodate different type of the temperature sensors and transducers, pressure/humidity transducers, pulse output meters and dry contact digital inputs.
There is possibility to connect up eight I/O modules in any possible combinations.
¶ Features
Pi Cubes Universal Input Module is providing four universal inputs.
Main features are :
- Four Universal inputs , selectable for 0-10V Analog ,0-20mA Analog and Resistance Mode.
- Resistance Mode is 0-350K compatible and supports 10K Type 2 NTC sensors.
- Digital Input in the resistance mode.
- Pulse Counter Input (Max 30 Hz) in resistance mode.
- Module Status LED, Flashing on power up and solid when the module communication is established.
¶ Technical Specification
Power Consumption : 20mA on 15VDC
A/D Convertor: 11 bit A/D Convertor
MCU: Cypress PSoC 4
Resistance Range Support: 0-350K
Maximum Pulse Frequncy: 30Hz
Dimensions: W 25mm (1.0") x H 95mm (3.7") x D 80mm (3.1")
Operating Parameters: 0ºC(32ºF) to 50ºC (122ºF) : 0-90% RH Non Condensing
CC Part Number: CC-NG-UI4
¶ Dial and DIP Switches
Dial switch is used to address Input Module and it supports address range from 0 to 7 for total eight modules.
DIP switches are used to configure each individual input for correct input mode.
Next modes are suported:
- "R" - Resistance Mode, used for Digital Inputs, Temperature sensors, Potentiometers and Pulse Inputs.
- "I" - Current Mode, used for 0-20mA/4-20mA Transducers.
- "U" - Voltage Mode, used for 0-10V/2-10V Transducers.
¶ Resistance Mode Wiring and Connections
¶ Current/Voltage Mode Wiring and Connections
¶ Using same 24VAC or PS Module Internal 15VDC Power Supply
